SinceVision has introduced the SGI-N030W, a wide-spot laser displacement sensor designed for high-speed, non-contact dimensional measurement on rough, textured and irregular surfaces. The company positions the product within its SGI Series and is targeting lithium-ion battery manufacturing, semiconductor processing and precision mechanical engineering, where micrometre-level measurement is required.
Conventional point-spot laser displacement sensors concentrate reflected laser energy on a small area. SinceVision says this makes readings sensitive to microscopic scratches, grain boundaries, brushed textures and matte finishes. Those features can create signal variations that are interpreted as dimensional changes, potentially producing false defect warnings and requiring extra inspection.
Wide-spot averaging
The SGI-N030W uses an expanded laser spot and optical triangulation. By collecting reflected light across a broader area, the sensor is designed to average localized microscopic peaks and valleys before signal conversion. SinceVision says this reduces the influence of surface roughness and optical scattering, improving stability on materials such as drawn metals, sandblasted surfaces and coated battery foils.
Specified performance and interfaces
The sensor has a 30 mm reference distance and a ±5 mm measurement range. SinceVision specifies repeatability of 0.05 µm on a diffuse white target under static conditions and linearity of ±0.02% of full scale. A 50 kHz sampling frequency, equivalent to a 20 µs update interval, is intended to support high-speed measurement and monitoring of dynamic processes.
Communication options include RS485, 100Base-TX Ethernet and switchable analogue outputs for 4–20 mA current or 0–10 V voltage signals. Master-slave synchronisation allows two sensors to operate in opposition, measuring from either side of a component or moving material.
Battery electrode thickness
One principal application is inline thickness measurement of lithium-ion battery electrodes. Coating thickness and uniformity affect energy density, internal resistance and long-term cell stability. SinceVision notes that offline contact micrometers or drop indicators can introduce operator variability and may deform wet or uncured electrode material, while periodic spot checks do not provide continuous coverage across a production reel.
The proposed arrangement uses two synchronised sensors above and below a moving electrode web, mounted on a calibrated, low-thermal-expansion marble gantry. The opposing heads measure their respective clearances to the material, and a controller combines those readings with the fixed mounting datum to calculate absolute thickness in real time. According to SinceVision, production trials demonstrated stable, repeatable thickness measurement within ±0.3 µm at a web speed of 300 mm/s. The company says the 50 kHz sampling rate provides longitudinal resolution for detecting local coating agglomerations, edge thinning and exposed substrate before the electrode reaches cell winding.
Semiconductor and assembly uses
SinceVision also intends the sensor for semiconductor manufacturing, where non-contact measurement matters for sensitive wafer surfaces. Potential uses include wafer position verification, edge detection, height measurement and checks of wafer seating and chuck alignment in atmospheric transfer modules and vacuum load-lock systems.
In precision assembly, the sensor can monitor voice coil motors, linear actuators and micro-steppers. Its 50 kHz sampling rate is intended to capture transient displacement, mechanical oscillations, settling behaviour and end-stop overshoot across the full range. Position data can be sent to machine control systems through the Ethernet interface for real-time monitoring and process control.
Jack Li, global sales and marketing director at SinceVision, said false defect warnings caused by surface texture remain a recurring challenge in battery manufacturing and precision assembly. He said conventional point-beam sensors can interpret microscopic scratches and rough coatings as actual thickness variations, slowing production lines and creating a need for additional manual inspection. The expanded spot is designed to average out these surface-related variations, while synchronisation between opposing heads supports high-speed thickness verification.
